DBS 18-2 iSP
您当前的位置: 首页 >> 产品中心 >> 音箱
特性Features
  • 高效有源超低音音箱(3000W EIAJ,PWM功率放大器模块)

  • 使用双18寸长冲程低频传感器,采用创新技术,提供优质的电声性能,可在长时间内准确提供非常高的声压级

  • 非常高的声压级(在1米距离上产生139.5 dB峰值声压级)

  • “分离式隔音低音炮”组件有助于整个箱体的结构完整性,以及减少共振和来自反射孔的空气湍流噪音

  • 配备Outline (欧浪) 的iMode技术,通过以太网连接提供完整的监听和控制

  • 专门设计用于地面堆码,箱体配有坚固的底座保护

  • 简易的吊挂系统可使箱体垂直或水平悬挂

  • 可选的手推车 - 采用“堆码和捆绑”的定位方式 - 方便装卸和运输

  • High-efficiency subwoofer featuring two 18” long-excursion low frequency transducers. It utilises a number of innovative technologies to provide premium electro-acoustic performance, including ultra-low power compression and distortion figures, to reliably deliver very high SPLs over extended periods

  • Very high power handling (9600 watts AES peak) and maximum sound pressure level (147 dB SPL peak at 1 metre)

  • Integral to the DBS 18-2 design is an example of Outline’s innovation in loudspeaker design, namely the ‘Decoupled Baffle Subwoofer’ assembly. This ingenious design contributes to the structural integrity of the entire cabinet as well as reducing resonance (and thus unwanted colouration) as well as air turbulence noise from the reflex ports

  • Specifically designed to be ground-stacked, the cabinet is equipped with sturdy feet to protect it and provide a solid base

  • Amplifier connection is made via a Speakon NL4 wired 2-way so that each transducer can be powered by a dedicated amplifier channel.

  • Optional trolley-board using a ‘stack & strap’ method of location – aids handling and transportation

  • Designed for use in applications requiring accurate and powerful reproduction of low frequencies at very high levels, its ability to reproduce program material with such integrity makes the DBS 18-2 applicable for either fixed or mobile use, which require energetic low frequency response without stress or equalisation.


DBS 18-2 iMODE是一款使用倒相式负载的双18寸超低音音箱,结合多种创新的扬声器技术,使其多年来能够在最高水平上提供稳定的性能。

高效放大器能够向传感器提供总共3000W EIAJ功率,从而实现非常好的功率匹配。 该系统体现了iMode技术(详见下文),从而实现全面可靠的控制和监听。箱体通过大面积长孔调谐低频。这使DBS 18-2 iMODE获得宽带通,并且可以大大延伸低频。DBS 18-2 iMODE的声学性能是经验、深入分析和精心设计的结晶。内部配置改善了整体结构的坚硬重量比,而挡板方向和低音单元位置的设计是为了最大限度地减少内共振,抑制箱体振动模式,并完全消除与这负载技术相关的常见“开孔湍流”。此Outline (欧浪) 设计叫做“分离式隔音低音炮”。 DBS 18-2 iMODE具有出色的电声功率转换能力,但仍可密闭在紧凑箱体里。由于精心选择了反射对齐和箱体的结构,所以性能非常高。 DBS 18-2 iMode可用频率范围在-10 dB为28 Hz至160 Hz,而在+/- 3 dB为34 Hz至107 Hz。传感器能够处理连续总功率2400W AES,在半空间可提供135 dB 声压级,而峰值声压级可达到139.5 dB。 DBS 18-2 iMODE箱体材料采用优质的18mm (酚醛胶合)波罗的海桦木胶合板制成,表面采用防刮防水黑色喷漆,面罩采用反谐振钢网。

该箱体有24个吊挂点,可以使用适当的配件进行垂直或水平悬挂。 提供可选的手推车用于在平坦或不平坦的地面上装卸和运输。 在箱体的侧面嵌入集成把手,在搬运过程中用于正面紧握。

The DBS 18-2 iMODE is a dual 18” subwoofer enclosure using phase inversion type loading, which, coupled with the use of several innovative loudspeaker technologies, allows it to deliver consistent performance at the highest levels over many years.

The high-efficiency amplifier is able to deliver a total of 3000 W EIAJ power to the transducers, thus enabling a very good power matching. The system embodies the iMode technology (see details below), thus allowing a comprehensive and reliable control and monitoring. The enclosure is tuned to a low frequency by way of a long port with a large surface area. This allows the DBS 18-2 iMODE to obtain a wide passband and a considerable extension towards the bottom end of the frequency response.

Its acoustic performance is the result of experience, in-depth analysis and careful design. The inner configuration improves the stiffness to-weight ratio of the overall structure while the baffle orientation and the woofer placement are designed to minimise internal resonance, dampen box-vibration modes and eliminate completely the usual ‘port turbulence’ associated with this loading method. The name of this Outline design is ‘Decoupled Baffle Subwoofer’.

The DBS 18-2 iMODE is capable of outstanding electrical to acoustic power conversion but still within a compact package. The performance is very high thanks to the careful choice of the reflex alignment and the construction of the cabinet. The DBS 18-2 iMODE has a useable frequency range at -10 dB of from 28 Hz to 160 Hz, while the response is just +/-3 dB from 34 Hz to 107 Hz. The transducers are able to handle a total continuous AES power of 2400 W, giving 135 dB SPL in half space, while peak values can reach 139.5 dB SPL. The DBS 18-2 iMODE’s high quality build finish is constructed from 18 mm (phenolic-glued) Baltic-birch plywood. The outer finish applied is a scratch-resistant, waterproof black paint and the front of the cabinet is protected by an anti-resonant steel grille.

The cabinet has 24 flying points, that makes vertical or horizontal hanging possible by using the appropriate accessories. The enclosure can accommodate an optional trolley-board, for handling and transporting on even or uneven surfaces. Recessed integrated handles in the side panels of the cabinet are used for a positive grip during handling.

The DBS 18-2 iMODE is equipped with Outline’s proprietary iMode Technology, a truly ‘intelligent’ digital loudspeaker control platform which combines advance digital signal processing and TCP/IP protocol to provide comprehensive control capabilities and a huge choice of interface devices. Users have real-time control over a series of parameter (levels, delay, eqs, shelving filters). iMode also allows the user to monitor performance parameters throughout the system (including VU-meters, clip and limiter status, amplifier overheating and protection) by using an iPad (with dedicated Outline software). With standard IP-based communication, the iMode platform is truly future-proof, offering control via netbook, smartphone, and many devices yet to appear. iMode operates on a Linux operating system with an Outline-customised kernel.


Outline大中华区独家总代理

Copyright @ 广州欧浪电声科技有限公司 版权所有 www.outline.cn  粤ICP备2020103654号